P-2602R/RL-DxA Series User's Guide
The following table shows RFC-2408 ISAKMP payload types that the log displays. Please
refer to RFC 2408 for detailed information on each type.
Table 138 RFC-2408 ISAKMP Payload Types
LOG DISPLAY
SA
PROP
TRANS
KE
ID
CER
CER_REQ
HASH
SIG
NONCE
NOTFY
DEL
VID
Log Commands
Go to the command interpreter interface
use the commands).
Configuring What You Want the ZyXEL Device to Log
1 Use the
configure which logs the ZyXEL Device is to record.
2 Use
sys logs category
Figure 174 Displaying Log Categories Example
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ip
dsp
ras>
3 Use
sys logs category
available for the category.
312
PAYLOAD TYPE
Security Association
Proposal
Transform
Key Exchange
Identification
Certificate
Certificate Request
Hash
Signature
Nonce
Notification
Delete
Vendor ID
command to load the log setting buffer that allows you to
sys logs load
to view a list of the log categories.
exit
bridge
voiceradius
followed by a log category to display the parameters that are
(Appendix I on page 315
ether
wan
lan
explains how to access and
Appendix H Log Descriptions