Tftp Upload Command Example - ZyXEL Communications P-2602R-DxA Series User Manual

Adsl2+ voip iad

Hide thumbs Also See for P-2602R-DxA Series:

Table of Contents

22.9.4 TFTP Upload Command Example

The following is an example TFTP command:

tftp [-i] host put firmware.bin ras

Where "i" specifies binary image transfer mode (use this mode when transferring binary files),

"host" is the device's IP address, "put" transfers the file source on the computer (firmware.bin

– name of the firmware on the computer) to the file destination on the remote host (ras - name

of the firmware on the device).

Commands that you may see in GUI-based TFTP clients are listed earlier in this chapter.

Chapter 22 Tools

P-2602R/RL-DxA Series User's Guide