Incoming Call Policy Screen - ZyXEL Communications P-2602R-DxA Series User Manual

Table 47 Phone Book > Speed Dial
LABEL
Number
Name
Type
Add
Speed Dial Phone
Book
Speed Dial
Number
Name
Destination
Modify
Clear
Cancel

10.18 Incoming Call Policy Screen

Use this screen to maintain rules for handling incoming calls. You can block, redirect, or
accept them. To access this screen, click VoIP > Phone Book > Incoming Call Policy.
Chapter 10 Voice
DESCRIPTION
Enter the SIP number you want the ZyXEL Device to call when you dial the speed-
dial number.
Enter a name to identify the party you call when you dial the speed-dial number.
You can use up to 127 printable ASCII characters.
Select Use Proxy if you want to use one of your SIP accounts to call this phone
number.
Select Non-Proxy (Use IP or URL) if you want to use a different SIP server or if
you want to make a peer-to-peer call. In this case, enter the IP address or domain
name of the SIP server or the other party in the field below.
Click this to use the information in the Speed Dial section to update the Speed
Dial Phone Book section.
Use this section to look at all the speed-dial entries and to erase them.
This field displays the speed-dial number you should dial to use this entry.
This field displays the SIP number the ZyXEL Device calls when you dial the
speed-dial number.
This field displays the name of the party you call when you dial the speed-dial
number.
This field is blank, if the speed-dial entry uses one of your SIP accounts.
Otherwise, this field shows the IP address or domain name of the SIP server or
other party. (This field corresponds with the Type field in the Speed Dial section.)
Use this field to edit or erase the speed-dial entry.
Click the Edit icon to copy the information for this speed-dial entry into the Speed
Dial section, where you can change it.
Click the Remove icon to erase this speed-dial entry.
Click this to erase all the speed-dial entries.
Click this to set every field in this screen to its last-saved value.
P-2602R/RL-DxA Series User's Guide
143