Advanced Internet Access Setup; Figure 39 Advanced Internet Access Setup; Table 21 Advanced Internet Access Setup - ZyXEL Communications P-2602R-DxA Series User Manual

Table 20 Internet Access Setup (continued)
LABEL
Connect on Demand Select Connect on Demand when you don't want the connection up all the time
Max Idle Timeout
Apply
Cancel
Advanced Setup

7.5.1 Advanced Internet Access Setup

To edit your ZyXEL Device's advanced WAN settings, click the Advanced Setup button in
the Internet Access Setup screen. The screen appears as shown.

Figure 39 Advanced Internet Access Setup

The following table describes the labels in this screen.

Table 21 Advanced Internet Access Setup

LABEL
RIP & Multicast
Setup
RIP Direction
RIP Version
Multicast
ATM QoS
Chapter 7 WAN Setup
DESCRIPTION
and specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select Connect
on Demand. The default setting is 0, which means the Internet session will not
timeout.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
P-2602R/RL-DxA Series User's Guide
89