Pstn Line Screen - ZyXEL Communications P-2602R-DxA Series User Manual

Table 48 Phone Book > Incoming Call Policy
LABEL
Advanced Setup
#
Activate
Incoming Call
Number
Forward to
Number
Condition
Apply
Cancel

10.19 PSTN Line Screen

Use this screen to set up the PSTN line you use to make regular phone calls. To access this
screen, click VoIP > PSTN Line > General.
Chapter 10 Voice
DESCRIPTION
The ZyXEL Device checks these rules before it checks the rules in the Forward to
Number section.
This field is a sequential value, and it is not associated with a specific rule. The
sequence is important, however. The ZyXEL Device checks each rule in order, and
it only follows the first one that applies.
Select this to enable this rule. Clear this to disable this rule.
Enter the phone number to which this rule applies.
Enter the phone number to which you want to forward incoming calls from the
Incoming Call Number. You may leave this field blank, depending on the
Condition.
Select the situations in which you want to forward incoming calls from the
Incoming Call Number, or select an alternative action.
Unconditional - The ZyXEL Device immediately forwards any calls from the
Incoming Call Number to the Forward to Number.
Busy - The ZyXEL Device forwards any calls from the Incoming Call Number to
the Forward to Number when your SIP account already has a call connected.
No Answer - The ZyXEL Device forwards any calls from the Incoming Call
Number to the Forward to Number when the call is unanswered. (See No
Answer Waiting Time.)
Block - The ZyXEL Device rejects calls from the Incoming Call Number.
Accept - The ZyXEL Device allows calls from the Incoming Call Number. You
might create a rule with this condition if you do not want incoming calls from
someone to be forwarded by rules in the Forward to Number section.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2602R/RL-DxA Series User's Guide
145