Common Phone Settings Screen - ZyXEL Communications P-2602R-DxA Series User Manual

P-2602R/RL-DxA Series User's Guide
Table 42 Phone > Analog Phone > Advanced
LABEL
Speaking Volume
Listening Volume
Echo Cancellation
G.168 Active
Dialing Interval
Select
Dialing Interval
Select
VAD Support
Back
Apply
Cancel

10.13.1 Common Phone Settings Screen

Use this screen to activate and deactivate immediate dialing. To access this screen, click VoIP
> Phone > Common.
136
DESCRIPTION
Enter the loudness that the ZyXEL Device uses for speech that it sends to the peer
device. -1 is the quietest, and 1 is the loudest.
Enter the loudness that the ZyXEL Device uses for speech that it receives from the
peer device. -1 is the quietest, and 1 is the loudest.
Select this if you want to eliminate the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Enter the number of seconds the ZyXEL Device should wait after you stop dialing
numbers before it makes the phone call. The value depends on how quickly you
dial phone numbers.
If you select Active Immediate Dial in VoIP > Phone > Common, you can press
the pound key (#) to tell the ZyXEL Device to make the phone call immediately,
regardless of this setting.
Select this if the ZyXEL Device should stop transmitting when you are not
speaking. This reduces the bandwidth the ZyXEL Device uses.
Click this to return to the Analog Phone screen without saving your changes.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Chapter 10 Voice