P-2602R/RL-DxA Series User's Guide
After you see a "restore configuration successful" screen, you must then wait one minute
before logging into the ZyXEL Device again.
Figure 133 Configuration Upload Successful
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 134 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
Appendix C on page 273
If the upload was not successful, an error screen will appear. Click Return to go back to the
Configuration screen.
22.5.3 Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the
ZyXEL Device to its factory defaults. The following warning screen appears.
Figure 135 Reset Warning Message
240
for details on how to set up your computer's IP address.
Chapter 22 Tools