Table of Contents
Advertisement
Figure 11 Wizard Step 2: WPA-PSK or WPA2-PSK Security
The following table describes the labels in this screen.
Table 5 Wizard Step 2: WPA-PSK or WPA2-PSK Security
LABEL
Pre-Shared Key
Back
Next
Exit
3.4 Connection Wizard: STEP 3: Internet Configuration
The NBG-418N offers three Internet connection types. They are Ethernet, PPP over Ethernet or
PPTP. The wizard attempts to detect which WAN connection type you are using. If the wizard does
not detect a connection type, you must select one from the drop-down list box. Check with your ISP
to make sure you use the correct type.
This wizard screen varies according to the connection type that you select.
Figure 12 Wizard Step 3: ISP Parameters.
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters or 64 HEX characters. You can set up
the most secure wireless connection by configuring WPA in the wireless LAN screens. You
need to configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Connection Wizard
25
Advertisement
Table of Contents
