Restart; Using Ftp Or Tftp To Back Up Configuration; Using The Ftp Commands To Back Up Configuration; Figure 136 Reset In Process Message - ZyXEL Communications P-2602R-DxA Series User Manual

Figure 136 Reset In Process Message

You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to

22.6 Restart

System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.

Figure 137 Restart Screen

22.7 Using FTP or TFTP to Back Up Configuration

This section covers how to use FTP or TFTP to save your device's configuration file to your
computer.

22.7.1 Using the FTP Commands to Back Up Configuration

1 Launch the FTP client on your computer.
2 Enter "
Chapter 22 Tools
Section 2.1.2 on page 47
", followed by a space and the IP address of your ZyXEL Device.
open
P-2602R/RL-DxA Series User's Guide
for more information on the RESET button.
241