Introducing The Web Configurator; Web Configurator Overview; Accessing The Web Configurator - ZyXEL Communications P-2602R-DxA Series User Manual

This chapter describes how to access and navigate the web configurator.

2.1 Web Configurator Overview

The web configurator is an HTML-based management interface that allows easy device setup
and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See Chapter 24 on page 253
Explorer.

2.1.1 Accessing the Web Configurator

1 Make sure your ZyXEL Device hardware is properly connected (refer to the Quick Start
Guide).
2 Launch your web browser.
3 Type "192.168.1.1" as the URL.
4 A password screen displays. The default password ("1234") displays in non-readable
characters. If you haven't changed the password yet, you can just click Login. Click
Cancel to revert to the default password in the password field. If you have changed the
password, enter your password and click Login.
Chapter 2 Introducing the Web Configurator
C
Introducing the Web
if you need to make sure these functions are allowed in Internet
P-2602R/RL-DxA Series User's Guide
H A P T E R
Configurator
2
45