Figure 25 Sip Registration Test - ZyXEL Communications P-2602R-DxA Series User Manual

P-2602R/RL-DxA Series User's Guide
Table 12 VoIP Wizard Configuration
LABEL
SIP Service Domain
User Name
Password
Check here to set up SIP2
settings.
Back
Apply
Exit
4 Your ZyXEL Device will attempt to register your SIP account with your VoIP service
provider. When your account is registered your PHONE 1 light will come on and you are
ready to make and receive VoIP phone calls.

Figure 25 SIP Registration Test

5 This screen displays if SIP account registration fails. If your DSL cable was
disconnected, you can try connecting it. Then wait a few seconds and click Register
Again. If your Internet connection was already working, you can click Back and try re-
entering your SIP account settings.
64
DESCRIPTION
Enter the SIP service domain name in this field (the domain name that
comes after the @ symbol in a SIP account like
Account.com). You can use up to 127 ASCII Extended set characters.
This is the name used to register this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up
to 95 ASCII characters.
Type the password associated with the user name above. You can use up
to 95 ASCII Extended set characters.
This screen configures SIP account 1. Select the check box if you have
a second SIP account that you want to use. You will need to configure
the same fields for the second SIP account.
Note: If you configure more than one SIP account, you need
to configure Analog Phone settings in
on page 134 to distinguish between the two accounts
when you make and receive phone calls.
Click Back to return to the previous screen.
Click Apply to complete the wizard setup and save your configuration.
Click Exit to close the wizard without saving your settings.
11223344@SIPA-
Section 10.12
Chapter 4 VoIP Wizard And Example