Dhcp Setup; Figure 47 Dhcp Setup; Table 26 Dhcp Setup - ZyXEL Communications P-2602R-DxA Series User Manual

8.4 DHCP Setup

Click Network > DHCP Setup to open this screen. Use this screen to configure the DNS
server information that the ZyXEL Device sends to the DHCP client devices on the LAN.

Figure 47 DHCP Setup

The following table describes the labels in this screen.

Table 26 DHCP Setup

LABEL
DHCP Setup
DHCP
IP Pool Starting
Address
Pool Size
DNS Server
DNS Servers
Assigned by DHCP
Server
Chapter 8 LAN Setup
DESCRIPTION
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (workstations) to obtain TCP/IP configuration at startup from a
server. If you select Server the ZyXEL Device provides TCP/IP configuration for
the clients. When set as a server, fill in the IP Pool Starting Address and Pool
Size fields.
If you select Relay the ZyXEL Device forwards TCP/IP configuration from an
alternate DHCP server.
Select None to stop the ZyXEL Device from acting as a DHCP server. When
you select None, you must have another DHCP server on your LAN, or else the
computers must be manually configured.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the size, or count of the IP address pool.
The ZyXEL Device passes a DNS (Domain Name System) server IP address to
the DHCP clients.
P-2602R/RL-DxA Series User's Guide
103