Displaying Logs - ZyXEL Communications ADSL VoIP IAD with 802.11g Wireless 2602HW Series User Manual

Figure 296 Displaying Log Parameters Example
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both]
ras>
4 Use
sys logs category
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to
record only alerts for that category, and 3 to record both logs and alerts for that category.
Not every parameter is available with every category.
5 Use the
in order to record logs).

Displaying Logs

• Use the
• Use the
log categories.
• Use the
individual Prestige log category.
• Use the
followed by a log category and a parameter to decide what to
command to store the settings in the Prestige (you must do this
sys logs save
command to show all of the logs in the Prestige's log.
sys logs display
sys logs category
sys logs display [log category]
command to erase all of the Prestige's logs.
sys logs clear
Prestige 2602HW Series User's Guide
display command to show the log settings for all of the
command to show the logs in an
505