Support Tool; Capture The Detailed Logs By Hyper Terminal - ZyXEL Communications AMG1202-T10B Support Notes

AMG1202-T10B/AMG1302-T10B
Support Notes
(1) Make sure the POWER LED is on (not blinking).
(2) Login web GUI as Administrator. Go to Network Setting -> Wireless ->
WPS -> WPS enable.
(3) Press the WPS ON/OFF button for 1~5 seconds and release it, or over 5
seconds WPS will activate automatically. The WPS LED should start blinking
for 120 seconds.

Support Tool

1. Capture the detailed logs by Hyper Terminal

Step 1: Initiate a hyper terminal connection from your PC (suppose you
connected to the LAN port of AMG1302-T10B/AMG1202-T10B)
79
All contents copyright © 2013 ZyXEL Communications Corporation.