If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 111 Configuration Restore Error
19.4.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration
information and returns the P-320W v3 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your P-320W v3. Refer to the chapter about introducing the web
configurator for more information on the RESET button.
19.5 Restart Screen
System restart allows you to reboot the P-320W v3 without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the P-320W v3
reboot. This does not affect the P-320W v3's configuration.
Figure 112 Maintenance > Tools > Restart
P-320W v3 User's Guide
Chapter 19 Tools
183