Restore Configuration; Reset To Factory Defaults - ZyXEL Communications VMG5313-BXB SERIES User Manual

Restore Configuration

Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your VMG.
Table 139 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Choose File to find it.
Choose File Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click this to begin the upload process.
Do not turn off the VMG while configuration file upload is in progress.
After the VMG configuration has been restored successfully, the login screen appears. Login again
to restart the VMG.
The VMG automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 173 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, the following screen will appear. Click OK to go back to the
Configuration screen.
Figure 174 Configuration Upload Error

Reset to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the VMG to its
factory defaults. The following warning screen appears.
Chapter 39 Backup Restore
VMG5313-BXB Series User's Guide
286