Configuring Static Route For Routing To Another Network - ZyXEL Communications VMG Series User Manual

The screen shows you the list of available media files in the USB storage device. Select the file you want
3
to open and push the Play button in the remote control.
4.7 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the
Zyxel Device's LAN. The router may be used to separate two department networks. This tutorial shows
how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the Zyxel Device's LAN. R connects to two networks, N1
(192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to
computer B (in N2 network), the traffic is sent to the Zyxel Device's WAN default gateway by default. In
this case, B will never receive the traffic.
Chapter 4 Tutorials
VMG/XMG Series User's Guide
69