Configure Static Route For Routing To Another Network - ZyXEL Communications LTE Series User Manual

4.10 C o nfig ure Sta tic Ro ute fo r Ro uting to Ano the r
Ne two rk
In order to extend your Intranet and control traffic flowing directions, you may connect a router to the
Zyxel Device's LAN. The router may be used to separate two area networks. This tutorial shows how to
configure a static routing rule for two network routings.
In the following figure, router
(192.168.1.x/24) and
computer
B
this case, will never receive the traffic.
B
is connected to the Zyxel Device's LAN.
R
(192.168.10.x/24). If you want to send traffic from computer
N2
(in network), the traffic is sent to the Zyxel Device's WAN default gateway by default. In
N2
LTE Series User's Guide
Chapter 4 Tutorials
47
connects to two networks,
R
(in network) to
A N1
N1