Call Configuration Screen - ZyXEL Communications LTE3311 series User Manual

Lte indoor iad
Hide thumbs Also See for LTE3311 series:
Table of Contents

Advertisement

18.5 Call Configuration Screen

Use this screen to maintain rules for handling incoming calls. To access this screen, click
Application > Voice over 3G > Call Conf..
Figure 91 Application > Voice over 3G > Call Conf.
The following table describes the labels in this screen.
Table 66 Application > Voice over 3G > Call Conf.
LABEL
Call Forwarding
Call Waiting
ID
Scenario
Phone Number
Rule
Apply
Cancel
Chapter 18 Voice over 3G
DESCRIPTION
Select Enable to forward incoming calls according to the call forwarding rules. Clear the
check box if you do not want the LTE3311 to forward any incoming calls.
Select Enable to place a call on hold while you answer another incoming call on the
same telephone number.
This is the index number of the call forwarding rule.
This shows the situations in which you want to forward incoming calls.
All Calls: the LTE3311 forwards all incoming calls to the specified phone number.
No Answer: the LTE3311 forwards incoming calls to the specified phone number if the
call is unanswered.
Unreachable: the LTE3311 forwards incoming calls to the specified phone number if
the phone is turned off or lost its signal.
Busy: the LTE3311 forwards incoming calls to the specified phone number if the phone
port is busy.
Enter the phone number to which you want to forward incoming calls.
Select to turn on or turn off the rule.
Note: If you enable the All Calls rule, other rules are not configurable/applicable.
Click this to save your changes and to apply them to the LTE3311.
Click this to set every field in this screen to its last-saved value.
LTE3311 Series User's Guide
139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents