The Call Rule Screen - ZyXEL Communications VMG Series User Manual

Note: You need to reboot the device after changing the region settings for it to take effect.
Figure 200 VoIP > Phone > Region
Each field is described in the following table.
Table 126 VoIP > Phone > Region
LABEL
Region Setting
Call Service Mode
Cancel
Apply

23.7 The Call Rule Screen

Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial entries if
you want to call SIP addresses that contain letters. Once you have configured a speed dial rule, you
can use a shortcut (the speed dial number, #01 for example) on your phone's keypad to call the phone
number.
Chapter 23 Voice
DESCRIPTION
Select the place in which the Zyxel Device is located.
Select the mode for supplementary phone services (call hold, call waiting, call transfer and
three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
Click this to set every field in this screen to its last-saved value.
Click this to save your changes and to apply them to the Zyxel Device.
VMG/XMG Series User's Guide
311