Configuring Radius; Figure 30 Radius; Table 20 Radius - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

P-660H/HW/W-T Series User' Guide

5.9 Configuring RADIUS

To set up your Prestige's RADIUS server settings, click WIRELESS LAN, RADIUS. The
screen appears as shown.

Figure 30 RADIUS

The following table describes the fields in this screen.

Table 20 RADIUS

LABEL
Authentication Server
Active
Server IP Address
Port Number
Shared Secret
Accounting Server
Active
Server IP Address
87
DESCRIPTION
Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Enter the IP address of the external authentication server in dotted decimal
notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the
external authentication server and Prestige.
Select Yes from the drop-down list box to enable user authentication
through an external accounting server.
Enter the IP address of the external accounting server in dotted decimal
notation.
Chapter 5 Wireless LAN