Figure 99 System Status: Show Statistics; Table 63 System Status: Show Statistics - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

P-660H/HW/W-T Series User' Guide

Figure 99 System Status: Show Statistics

The following table describes the fields in this screen.

Table 63 System Status: Show Statistics

LABEL
System up Time
CPU Load
LAN or WAN Port
Statistics
Link Status
Upstream Speed
Downstream Speed This is the downstream speed of your Prestige.
Node-Link
Interface
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
Collisions
199
DESCRIPTION
This is the elapsed time the system has been up.
This field specifies the percentage of CPU utilization.
This is the WAN or LAN port.
This is the status of your WAN link.
This is the upstream speed of your Prestige.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays the type of port.
For the WAN port, this displays the port speed and duplex setting if you're using
Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial
(starting to trigger a call) and drop (dropping a call) if you're using PPPoE
encapsulation.
For a LAN port, this shows the port speed and duplex setting.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This is the number of collisions on this port.
Chapter 17 Maintenance