Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Related Manuals for ZyXEL Communications P-660HW-T v2
Summary of Contents for ZyXEL Communications P-660HW-T v2
-
Page 1: Quick Start Guide
P-660HW-T v2 802.11g Wireless ADSL 2+ 4-port Gateway Quick Start Guide Version 3.40 6/2006 Edition 1... -
Page 2: Hardware Connections
If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial on the included CD. 1 DSL: Use a telephone wire to connect your P-660HW-T v2’s DSL port to a telephone jack (or to a splitter, if one is already installed). -
Page 3: Status Page
4 Push in the POWER button. Look at the lights on the front panel. • The POWER light blinks while your P-660HW-T v2 starts up and stays on once it is ready. The DSL light is on when the P-660HW-T v2 has a DSL connection, and the WLAN light is on when the wireless LAN is ready. The INTERNET light is on when you are able to access the Internet and blinks when the P-660HW-T v2 is sending or receiving data. - Page 4 If the web page opens correctly, your P-660HW-T v2 is ready for you to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
- Page 5 5 Click Go to Wizard setup. Then, click Apply. 6 Click INTERNET/WIRELESS SETUP. Wait while your P-660HW-T v2 tries to detect your DSL connection. 7 Follow the directions in the wizard. Do not change default settings if your ISP did not provide information.
-
Page 6: Troubleshooting
Enable OTIST only if your wireless clients support WPA and OTIST. You must enable OTIST on the P-660HW-T v2 and all wireless clients (in any order) within three minutes. To enable OTIST on the P-660HW-T v2, you can either use the wizard (see...