Figure 9 Internet Connection With Rfc 1483; Table 6 Internet Connection With Pppoe; Table 7 Internet Connection With Rfc 1483 - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Adsl 2+ gateway
Hide thumbs Also See for ADSL 2+ Gateway P-660HW-T1:
Table of Contents

Advertisement

Table 6
Internet Connection with PPPoE
LABEL
Service Name
User Name
Password
IP Address
Connection
Network
Address
Translation
Back
Next
Figure 9
Internet Connection with RFC 1483
The following table describes the fields in this screen.

Table 7 Internet Connection with RFC 1483

LABEL
IP Address
Network Address
Translation
Chapter 3 Wizard Setup for Internet Access
DESCRIPTION
Type the name of your PPPoE service here.
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the user name above.
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the text
box below.
Select Connect on Demand when you don't want the connection up all the time and
specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default
setting selects Connection on Demand with 0 as the idle time-out, which means the
Internet session will not timeout.
Select Nailed-Up Connection when you want your connection up all the time. The
Prestige will try to bring up the connection automatically if it is disconnected.
The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
chapter for more details.
Click Back to go back to the first wizard screen.
Click Next to continue to the next wizard screen.
DESCRIPTION
This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field.
Select None, SUA Only or Full Feature from the drop-down list box. Refer to the
NAT chapter for more details.
P-660H/HW/W-T Series User' Guide
56

Advertisement

Table of Contents
loading

Table of Contents