P-660H/HW/W-T Series User' Guide
Figure 149 Menu 15.2.1 NAT Server Setup
Rule
---------------------------------------------------
10.
11.
12.
4 Enter a port number in an unused Start Port No field. To forward only one port, enter it
again in the End Port No field. To specify a range of ports, enter the last port to be
forwarded in the End Port No field.
5 Enter the inside IP address of the server in the IP Address field. In the following figure,
you have a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at
192.168.1.33.
6 Press [ENTER] at the "
configuration after you define all the servers or press [ESC] at any time to cancel.
Figure 150 Multiple Servers Behind NAT Example
27.5 General NAT Examples
The following are some examples of NAT configuration.
261
Menu 15.2 - NAT Server Setup
Start Port No.
1.
Default
2.
21
3.
0
4.
0
5.
0
6.
0
7.
0
8.
0
9.
0
0
0
0
Press ENTER to Confirm or ESC to Cancel:
Press ENTER to confirm ...
End Port No.
IP Address
Default
0.0.0.0
21
192.168.1.33
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
0.0.0.0
Chapter 27 Network Address Translation (NAT)
" prompt to save your