Radius Server; Configuring A Default Radius Server; Figure 302 Radius Server Network Example - ZyXEL Communications ZyWALL 1050 User Manual

Hide thumbs Also See for ZyWALL 1050:

Table of Contents

Table 155 Objects > AAA Server > LDAP > Group > Add (continued)

31.4 RADIUS Server

RADIUS (Remote Authentication Dial-In User Service) authentication is a popular protocol

used to authenticate users by means of an external server instead of (or in addition to) an

internal device user database that is limited to the memory capacity of the device. In essence,

RADIUS authentication allows you to validate a large number of users from a central location.

To configure the default external RADIUS server to use for user authentication, click Objects

> AAA Server > RADIUS to display the screen as shown.

Chapter 31 AAA Server

Specify the URI (Uniform Resource Identifier) of an LDAP server. You can enter

the IP address (in dotted decimal notation) or the fully qualified domain name

(FQDN; up to 63 alphanumerical characters) of the LDAP server.

to add a new LDAP server. You can add up to four LDAP member

to delete an LDAP server.

Click OK to save the changes.

Click Cancel to discard the changes.

ZyWALL 1050 User's Guide