Firmware Upgrade; Figure 105 Firmware Upgrade; Table 69 Firmware Upgrade - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

P-660H/HW/W-T Series User' Guide

17.7 Firmware Upgrade

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with
a.bin extension, for example, "Prestige.bin". The upload process uses HTTP (Hypertext
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot. See
Only use firmware for your device's specific model. Refer to the label on the bottom of your
device.
Click Firmware to open the following screen. Follow the instructions in this screen to upload
firmware to your Prestige.

Figure 105 Firmware Upgrade

The following table describes the labels in this screen.

Table 69 Firmware Upgrade

LABEL
File Path
Browse...
Upload
Reset
Note: Do NOT turn off the Prestige while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the Prestige again.
205
Chapter 33 on page 306
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
Click this button to clear all user-entered configuration information and return the
Prestige to its factory defaults.
for upgrading firmware using FTP/TFTP commands.
Chapter 17 Maintenance