Figure 217 Ip Routing Policy Example - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

P-660H/HW/W-T Series User' Guide

Figure 217 IP Routing Policy Example

Gateway addr
1 Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
2 Create another policy set in menu 25.
3 Create a rule in menu 25.1 for this set to route packets from any host (
means any host) with protocol TCP and port FTP access through another gateway
(192.168.1.100).
335
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 192.168.1.2
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
= 192.168.1.1
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
Packet length= 10
Len Comp= N/A
end= 192.168.1.64
end= N/A
end= N/A
end= 80
Log= No
IP=0.0.0.0
Chapter 36 IP Policy Routing