Chapter 34 System Maintenance; Command Interpreter Mode; Figure 204 Command Mode In Menu 24; Figure 205 Valid Commands - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

This chapter leads you through SMT menus 24.8 to 24.10.

34.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 —
System Maintenance. A list of valid commands can be found by typing help or ? at the
command prompt. Type "

Figure 204 Command Mode in Menu 24

Figure 205 Valid Commands

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
wan
wlan
hdap
8021x
ras>

Chapter 34 System Maintenance

System Maintenance
" to return to the SMT main menu when finished.
exit
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:
exit device
poe config
ip ppp
bm lan
P-660H/HW/W-T Series User' Guide
C
H A P T E R
ether
pci
bridge
radius
3 4
318