Overview The P-660HW-Tx v3 is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11b/g wireless capability. The P-660HW-Tx v3 allows wired and wireless clients to safely access the Internet. See your User’s Guide for background information on all features.
4 Push in the POWER button. Look at the lights on the front panel. • The POWER light blinks while your P-660HW-Tx v3 starts up and stays on once it is ready. The DSL light is on when the P-660HW-Tx v3 has a DSL connection, and the WLAN light is on when the wireless LAN is ready.
Page 4
If any other screens appear, follow the directions in the screen. If the web page opens correctly, your P-660HW-Tx v3 is ready for you to use. If the web page does not open, follow the rest of the steps. You should have the information provided by your ISP.
Page 5
5 Click Go to Wizard setup. Then, click Apply. 6 Click INTERNET/WIRELESS SETUP. Wait while your P-660HW-Tx v3 tries to detect your DSL connection. 7 Follow the directions in the wizard. Do not change default settings if your ISP did not provide information.
A) Check the lights on the front panel. If they are different from what is described in section 1, make sure the P-660HW-Tx v3 is correctly connected. (See section 1.) If the lights are still different, turn off the device, wait a few seconds, and turn it on again.