Configuring Class Setup; Media Bandwidth Management Class Configuration; Figure 94 Media Bandwidth Management: Class Setup; Table 57 Media Bandwidth Management: Class Setup - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

16.10 Configuring Class Setup

The class setup screen displays the configured bandwidth classes by individual interface.
Select an interface and click the buttons to perform the actions described next. Click "+" to
expand the class tree or click "-"to collapse the class tree. Each interface has a permanent root
class. The bandwidth budget of the root class is equal to the speed you configured on the
interface (see
child-class layers for the root class.
Refer to Section 16.1 on page 182
To add or delete child classes on an interface, click Media Bandwidth Management, then
Class Setup. The screen appears as shown (with example classes).

Figure 94 Media Bandwidth Management: Class Setup

The following table describes the labels in this screen.

Table 57 Media Bandwidth Management: Class Setup

LABEL
Interface
Back
Add Child-Class
Edit
Delete
Statistics

16.10.1 Media Bandwidth Management Class Configuration

Configure a bandwidth management class in the Class Configuration screen. You must use
the Media Bandwidth Management - Summary screen to enable bandwidth management on
an interface before you can configure classes for that interface.
Refer to Section 16.1 on page 182
Chapter 16 Media Bandwidth Management Advanced Setup
Section 16.9 on page 188
for more information.
DESCRIPTION
Select an interface from the drop-down list box for which you wish to set up classes.
Click Back to go to the main Media Bandwidth Management screen.
Click Add Child-class to add a sub-class.
Click Edit to configure the selected class. You cannot edit the root class.
Click Delete to delete the class and all its child-classes. You cannot delete the root
class.
Click Statistics to display the status of the selected class.
for more information.
P-660H/HW/W-T Series User' Guide
to configure the speed of the interface). Configure
190