Snmp Traps; Figure 180 Menu 22 Snmp Configuration; Table 99 Menu 22 Snmp Configuration; Table 100 Snmp Traps - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Figure 180 Menu 22 SNMP Configuration

The following table describes the SNMP configuration parameters.

Table 99 Menu 22 SNMP Configuration

FIELD
SNMP:
Get Community
Set Community
Trusted Host
Trap:
Community
Destination
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:

30.4 SNMP Traps

The Prestige will send traps to the SNMP manager when any one of the following events
occurs:

Table 100 SNMP Traps

TRAP # TRAP NAME
1 coldStart (defined in RFC-1215)
2 warmStart (defined in RFC-1215)
3 linkDown (defined in RFC-1215)
4 linkUp (defined in RFC-1215)
Chapter 30 SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Type the Get Community, which is the password for the incoming Get- and
GetNext requests from the management station.
Type the Set community, which is the password for incoming Set requests from
the management station.
If you enter a trusted host, your Prestige will only respond to SNMP messages
from this address. A blank (default) field means your Prestige will respond to all
SNMP messages it receives, regardless of source.
Type the trap community, which is the password sent with each trap to the
SNMP manager.
Type the IP address of the station to send your SNMP traps to.
" to save your configuration, or press [ESC] at any time to cancel.
P-660H/HW/W-T Series User' Guide
Press ENTER to Confirm
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent with the port number when any of the
links are down. See the following table.
A trap is sent with the port number.
288