Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Related Manuals for ZyXEL Communications P-660H-T Series
Summary of Contents for ZyXEL Communications P-660H-T Series
-
Page 1: Quick Start Guide
P-660H-T Series ADSL2+ 4-port Security Gateway P-660HW-T Series 802.11g Wireless ADSL2+ 4-port Security Gateway Quick Start Guide Version 3.40 7/2005... -
Page 2: Hardware Connections
P-660HW-T and P-660H-T Series Quick Start Guide Overview The P-660HW-T is an ADSL Internet gateway with IEEE 802.11g wireless capability and a 4-port built-in switch. The P-660H-T is an ADSL Internet gateway with a 4-port built-in switch. You may need your Internet access information. - Page 3 P-660HW-T and P-660H-T Series Quick Start Guide P-660H-T Series P-660HW-T Series 1 DSL: Connect the Prestige to a telephone jack using a telephone wire. 2 LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or Internet access.
-
Page 4: Accessing The Web Configurator
P-660HW-T and P-660H-T Series Quick Start Guide After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS and/or WLAN LEDs then turn steady on if the testing is successful. - Page 5 P-660HW-T and P-660H-T Series Quick Start Guide Note: If you do not see the next screen, then please read Section 6.1 on page 10 2 Click Login. 3 Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore.
- Page 6 P-660HW-T and P-660H-T Series Quick Start Guide 1 From the Mode drop-down list box, select Routing (default) if you want to use routing features such as NAT. 2 The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From the Network Address Translation drop-down list box, select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT.
- Page 7 P-660HW-T and P-660H-T Series Quick Start Guide Note: You will only see the next two screens in Routing mode. • PPPoA • RFC1483 3 Verify your 4 Click Save Settings in the screen shown in step LAN and 3 to go to the final wizard screen.The Prestige automatically tests the connection to the settings.
- Page 8 P-660HW-T and P-660H-T Series Quick Start Guide Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if enabled). 1 Click the Wireless LAN link under 2 Click 802.1x/WPA. Advanced Setup. Select Authentication...
- Page 9 P-660HW-T and P-660H-T Series Quick Start Guide Click If you have Advanced servers on your Setup and LAN, configure then NAT to an SUA server open the set to have NAT-Mode them visible to screen. the outside. Select SUA From the NAT -...
-
Page 10: Troubleshooting
P-660HW-T and P-660H-T Series Quick Start Guide 6 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on when Make sure that you have the correct power adaptor connected to the Prestige, it you connect the Prestige’s is plugged into an appropriate power source and the Prestige is turned on. - Page 11 P-660HW-T and P-660H-T Series Quick Start Guide 4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties. 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options.