Syslog And Accounting; Figure 193 Sample Error And Information Messages; Figure 194 Menu 24.3.2 System Maintenance: Syslog And Accounting; Table 107 Menu 24.3.2 System Maintenance : Syslog And Accounting - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

P-660H/HW/W-T Series User' Guide

Figure 193 Sample Error and Information Messages

53 Sat Jan 01 00:00:03 2000 PP01 -WARN SNMP TRAP 0: cold start
54 Sat Jan 01 00:00:03 2000 PP01
55 Sat Jan 01 00:00:03 2000 PP01
56 Sat Jan 01 00:00:03 2000 PP20
57 Sat Jan 01 00:00:03 2000 PP21
58 Sat Jan 01 00:03:06 2000 PP19
59 Sat Jan 01 00:03:06 2000 PP01
60 Sat Jan 01 00:23:21 2000 PP01
62 Sat Jan 01 00:23:38 2000 PP19
63 Sat Jan 01 00:23:38 2000 PP01
Clear Error Log (y/n):

32.4.2 Syslog and Accounting

The Prestige uses the syslog facility to log the CDR (Call Detail Record) and system messages
to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System
Maintenance — UNIX Syslog, as shown next.

Figure 194 Menu 24.3.2 System Maintenance: Syslog and Accounting

You need to configure the UNIX syslog parameters described in the following table to activate
syslog then choose what you want to log.

Table 107 Menu 24.3.2 System Maintenance : Syslog and Accounting

PARAMETER
UNIX Syslog:
Active
Syslog IP Address
Log Facility
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:
The following are examples of the four types of syslog messages sent by the Prestige:
301
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Type the IP address of your syslog server.
Use [SPACE BAR] and then [ENTER] to select one of seven different local
options. The log facility lets you log the message in different server files. Refer to
your UNIX manual.
" to save your configuration, or press [ESC] at any time to cancel.
INFO main: init completed
INFO Starting Connectivity Monitor
INFO adjtime task pause 1 day
INFO monitoring WAN connectivity
INFO SMT Password pass
INFO SMT Session Begin
INFO SMT Session End
INFO SMT Password pass
INFO SMT Session Begin
Press ENTER to Confirm
Chapter 32 System Information and Diagnosis