Setting Up Your Computer's Ip Address; Windows 95/98/Me - ZyXEL Communications ADSL 2+ Gateway P-660HW-T1 User Manual

Setting up Your Computer's IP Address

All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed.
Windows 95/98/Me/NT/2000/XP, Macintosh OS 7 and later operating systems and all
versions of UNIX/LINUX include the software components you need to install and use TCP/
IP on your computer. Windows 3.1 requires the purchase of a third-party TCP/IP application
package.
TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS
7 and later operating systems.
After the appropriate TCP/IP components are installed, configure the TCP/IP settings in order
to "communicate" with your network.
If you manually assign IP information instead of using dynamic assignment, make sure that
your computers have IP addresses that place them in the same subnet as the Prestige's LAN
port.

Windows 95/98/Me

Click Start, Settings, Control Panel and double-click the Network icon to open the Network
window.
Appendix C
P-660H/HW/W-T Series User' Guide
Appendix C
360