Extended S-Registers "Atsn=X - ZyXEL Communications U-336S User Manual

Command Function & Description
modem will dial as soon as it detects a dial
tone. This register also sets the time-out
interval for the "W" dial modifier to wait for
the dial tone. (See also S41b4)
S7= Set duration, in number of seconds modem
waits for a carrier
S8= Set duration, in seconds, for pause (,) option
in Dial command and pause between
command re-executions for Repeat (>)
command
S9= Set duration, in tenths of a second of remote
carrier signal before recognition (Ignored if
in non-FSK or half-duplex operation)
S10= Set duration, in tenths of a second, modem
waits after loss of carrier before hanging up
S11= Set duration and spacing, in milliseconds, of
dialed Touch-Tones

Extended S-Registers "ATSn=x"

Command bit dec hex Function and description
S13= bit dec hex Bit-mapped register
1 2
S14= bit dec hex Bit-mapped register:
0 0
1
2 Capture modem manufacturer
information during V.42
handshake, can be displayed at
ATI2 <Last Speed/Protocol>
line if available ('Flash' or '
ZyXEL' stands for ZyXEL
connection)
0 Modem auto-handshake on
Originate mode
1 Modem auto-handshake on
Status Registers & Result Codes 105
+Ref.
+060
+002
+006
+007
+070
Ref.
+000
+002
*M0
*M1