Extended S-Registers "Atsn=X - ZyXEL Communications U-336R/RE User Manual

Command Function & Description
"W" dial modifier to wait for the dial tone.
(See also S41b4)
S7= Set duration, in number of seconds modem
waits for a carrier.
S8= Set duration, in seconds, for pause (,) option in
Dial command and pause between command
re-executions for Repeat (>) command.
S9= Set duration, in tenths of a second of remote
carrier signal before recognition (Ignored if in
non-FSK or half-duplex operation).
S10= Set duration, in tenths of a second, modem
waits after loss of carrier before hanging up.
S11= Set duration and spacing, in milliseconds, of
dialed Touch-Tones.

Extended S-Registers "ATSn=x"

Command bit
S13= bit
1
S14= bit
0
1
dec hex Function and description
dec hex Bit-mapped register.
2 2 Capture modem
manufacturer information
during V.42 handshake, can
be displayed at ATI2 <Last
Speed/Protocol> line if
available ('Flash' or '
ZyXEL' stands for ZyXEL
connection).
dec hex Bit-mapped register:
0 0 Modem auto-handshake on
Originate mode.
1 1 Modem auto-handshake on
Answer mode.
0 0 Grant Remote Digital Loop- &T4
Status Registers & Result Codes 93
+Ref.
+060
+002
+006
+007
+070
Ref.
+000
+002
*M0
*M1