Advertisement
Chapter
7
Activation Code
Password
Connection Status
3. Click Apply
7.5.2.4 Rainbow initialization
To access to the Rainbow infrastructure, OXO Connect generates the FQDN using Rainbow domain.
This domain is the same for all OXO Connects.
The generated FQDN is: wss://agent.[Rainbow domain]:443
OXO Connect resolves the generated FQDN to establish the link to Rainbow infrastructure.
In case of connection failure, CCCtrlA periodically retries to connect to PCG after 10 sec, 30 sec,
1 min, 2 min, 4 min, 8 min, and every 16 min.
At any time, it is possible to trigger a connection attempt by disabling and re-enabling the CCCtrlA
connection setting, see
This also resets the delay between the attempts in case of connection failures.
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Configuring services
Enter the activation code used by the CCCtrlA when it connects
to the Rainbow infrastructure for the first time. This code must
be provided by the Rainbow infrastructure administrator in order
to be able to authenticate the OXO Connect on the Rainbow in-
frastructure during the initial login phase.
This field is mandatory when the Rainbow enabled check box
is enabled.
After connection to the Rainbow infrastructure and reception of
the login password, this field is grayed.
If you need to modify the Activation Code, click the Reset but-
ton to reset the login to the Rainbow servers and enter the new
Activation Code.
Caution:
Pressing the Reset button will disable the Rainbow connection.
This field is read-only. It displays the login password sent by the
Rainbow infrastructure after connection. It corresponds to the
last 8 characters taken from an encrypted password using the
SHA-256 algorithm.
This field displays the status of the connection with the Rainbow
infrastructure:
•
Connected: a connection is established with the Rainbow
infrastructure.
•
Disconnected: a connection is not yet established, or there
is a problem with the connection to the Rainbow
infrastructure. This can occur when the CCCtrlA is stopped.
Click the Status update button to update the Connection Sta-
tus.
Enabling/disabling CCtrlA
on page 96.
97/216
Advertisement
