Advertisement
Chapter
3
Installation process overview
In BTCO mode, installation consists in:
1. Powering and connecting the PBX to the customer LAN
2. Starting the PBX and customer configuration
Note:
In BTCO mode, the country target and license keys are present in the OXO Connect delivered on customer
site.
In stock mode, the customer's country target and license keys must be loaded on the OXO Connect
before starting its configuration on customer site.
The country target and license keys can be either automatically loaded on the OXO Connect via the
Cloud Connect infrastructure, or configured manually on PBX using the OMC application. Manual
configuration can apply when there is no available connection to the internet, or if the customer does
not want a connection to the Cloud Connect infrastructure.
Figure 3.1: Installation in stock mode with automatic entry of country target and license keys
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
35/216
Advertisement
