Nokia Alcatel-Lucent OXO Connect Series Installation Manual page 76

Chapter 6
6.1.4.1 Configuration of the OXO Connect DHCP server for IP devices
The following softkeys are available:
• Disable or Enable: Disabling or enabling OXO Connect DHCP server for IP devices provided by
ALE International (enabled by default)
• DHCP1: See Defining the IP address range for DHCP1
• DHCP2: Defining the IP address range for DHCP2
• DHCP3: Defining the IP address range for DHCP3
• DHCP4: Defining the IP address range for DHCP4
Other fixed keys of the set:
• Back: Return to the previous menu
• Exit: Return to home page
6.1.4.1.1 Defining the IP address range for DHCP1
Note:
The available softkeys are the same for DHCP2, DHCP3, and DHCP4
The following softkeys are available:
• StartIP: See StartIP
• EndIP: See EndIP
Other fixed keys of the set:
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Starting the configuration
Tue Feb 28 2013
Disable
DHCP2
Scroll up
Tue Feb 28 2013
DHCP4
(IP configuration
Tue Feb 28 2013
StartIP
on page 77
on page 77
DHCP
Status : Enable
DHCP1
DHCP3
Scroll
down
DHCP
Status : Enable
on page 76
on page 75)
DHCP1
EndIP
76/216