Advertisement
Chapter
9
Station default configuration
9.1 Default configuration
9.1.1 8038 Premium DeskPhone, 8039 Premium DeskPhone and 8068 Premium
DeskPhone sets
Each of these sets has 2 programmable keys (F1/F2) and 40 virtual add-on keys. Their default
functions depend on:
•
The configuration of the set (Operator, Manager, Assistant, Normal or Attendant)
•
The market in which the set is sold (US or non-US)
•
The operating mode of the set (KeySystem or PABX mode)
The default functions of the F1/F2 keys are summarized in the table below (they are the same for
KeySystem and PABX modes).
table 9.1: F1/F2 Key Functions
Market
Non-US
US
The default functions of the virtual keys are summarized in the figures below (separate figures are
provided for the US market). The virtual keys are selected using 8 physical buttons, 4 on each side of
the set's display. There are 5 pages of virtual keys (the pages can be scrolled through using the up/
down buttons of the set's 4-way navigator), with 8 virtual keys on each page. Each of the following
figures shows the first page of virtual keys and then indicates the progression to the last (fifth) page of
virtual keys.
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Set Configuration
Operator
Manager
Secretary
Normal
Operator
Manager
Secretary
Normal
Key F1
Normal/Restricted Mode
Secretary
Manager
Call
Manual Hold
Manual Hold
Manual Hold
Manual Hold
Key F2
Operator Diversion
Screening
Screening
Call
Transfer
Transfer
Transfer
Transfer
190/216
Advertisement
