Advertisement
Chapter
8
To replace a set initially installed as Open SIP phone by a same set and have it recognized properly by
the system:
1. Disconnect the phone from the network
2. In OMC, delete the registration Open SIP Phone
3. Reconnect the 8001/8001G Deskphone
It initializes normally and the OXO Connect license-bypass mechanism makes it appear as a SIP
8001/8001G Deskphone.
It is preferable to disconnect 8001/8001G Deskphone set from the network during this operation. Once
reconnected, the set initializes normally and the OXO Connect license-bypass mechanism makes it
appear as a SIP phone 8001/8001G Deskphone.
8.1.1.1.8 8001/8001G Deskphone password management
After a 8001/8001G Deskphone SIP Phone starts with the OXO Connect, the user password for the set
web interface is changed from the default values: root / root to admin / admin.
To configure the set, if no new administrator password has been manually entered:
•
On the 8001/8001G Deskphone set : when the password is requested, do not enter anything and
select OK (or try as 000000 password)
•
From the web Admin interface, enter: admin / admin
If there is a specified password, different from the default password, for a 8001/8001G Deskphone SIP
phone configured in the OXO Connect, after the set is connected to the system, the login changes to
admin with the password specified in OMC System Misc/SIP Phone Admin password/SIP phone for
the phone.
If a manual 8001/8001G Deskphone SIP phone reset to factory settings is requested (for instance if the
administrator password is lost), on the set:
1. Go Menu > Functions Settings > Dial to find:
Set the option to "off" (no dial by name)
2. With the phone idle, dial *3*3*3"
This reboots the set to factory settings
8.1.2 8082 My IC Phone
8.1.2.1 Commissioning
8.1.2.1.1 Overview
This module presents all the actions required for commissioning the 8082 My IC Phone sets.
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Device commissioning
111/216
Advertisement
