Advertisement
Chapter
6
The message "Date and time must be programmed" is displayed when the "Date" and "Time" fields
are empty or contain the default values.
6.1.15 SYSTEM RESET
This menu is used to confirm resetting the system.
Finish
After the reset, your system will operate with the new parameters entered.
6.2 Starting the configuration via OMC
At this stage, the PBX must run with the appropriate target country and license keys (open state) (see:
Loading the country target and license keys
through the Cloud Connect infrastructure, network configuration is done and Cloud Connect is enabled.
If this information was manually entered via the OMC, the PBX runs with its default network
configuration.
Using the OMC, ensure the following operations are completed:
•
Modifying management passwords
•
Configuring PBX parameters
•
Configuring customer/supplier information
The computer on which the OMC application is running, must be connected to the LAN port of the main
CPU board. The default IP address for the main CPU board is 192.168.92.246. The computer must
be configured in static mode with an IP address and subnet mask compatible with those of the main
CPU board (for example: 192.168.92.1 and 255.255.255.0).
6.2.1 Accessing PBX configuration via the OMC
Skip this section if the country target and license keys have been previously entered via the OMC.
To access PBX configuration via the OMC:
1. Launch the OMC and select Comm > Connect
The Communication Path window opens
2. Select the LAN/WAN option (recommended), enter the IP address for the main CPU board, then
click OK
A login page is displayed
3. Enter an administration password and click OK
The PBX parameters are displayed in the OMC tree structure
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Starting the configuration
System reset; the display shows "System reset in progress"
on page 86
on page 87
on page 69). If this information was automatically loaded
on page 87
85/216
Advertisement
