Advertisement
Chapter
8
The 4135 IP Conference Phone is a SIP device which has no handset; it is dedicated to be used as
central for conferences.
Conferences are not managed by the system, but by the device itself. Up to four 4135 IP Conference
Phones can be connected to the OXO Connect.
8.1.3.1.2 Commissioning the set
This section describes how to commission the set in the two available commissioning types:
•
Static: commissioning is manual on the set and on OMC
•
Dynamic (DHCP): the set automatically retrieves its IP address and other parameters from a DHCP
server (OXO Connect DHCP server or an external DHCP server) . Complementary operations are
necessary on the set and on OMC
For static commissioning, operations are:
1. Configure the user in OMC, refer to
2. Connect the set to the LAN, refer to
3. Configure the network parameters on the set, refer to
initialization
on page 128
4. Export the server certificate from the OXO Connect: refer to
OXO Connect
5. Upload the certificate on the 4135 IP Conference Phone
For dynamic commissioning, operations are:
1. Configure OXO Connect DHCP server, refer to
127, or configure an external DHCP server, refer to
127
2. Connect the set to the LAN, refer to
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Device commissioning
Figure 8.4: 4135 IP Conference Phone set connectors
Configuring the user by OMC
Connecting the set to the LAN
on page 128
Connecting the set to the LAN
on page 126
on page 126
Configuring network parameters for static
Exporting the server certificate from the
Configuring OXO Connect DHCP server
Configuring an external DHCP server
on page 126
on page
on page
125/216
Advertisement
