Download Print this page

Nokia Alcatel-Lucent OXO Connect Series Installation Manual page 121

Advertisement

Chapter
8
OMC Parameter
Video Encoding Profile Medium
Video Encoding Profile High
Video Call Packetization Mode
8.1.2.1.4.2 Enabling video support for a 8082 My IC Phone set
The Video Support feature right is specific to each 8082 My IC Phone set. Video telephony is enabled
or disabled specifically for each set.
Note:
Enabling is mandatory to support Video calls (incoming or outgoing) for 8082 My IC Phone sets.
To enable/disable "Video Support":
OMC -> User/Base stations List -> 8082 MY IC Phone-> Details-> Features -> Feature Rights ->
Part 1
Video support: select the check box to allow video support on the 8082 My IC Phone.
8.1.2.1.5 SIP door phone parameters
Note:
If SIP door phone management is to be done with video support, refer to
enable video.
The generic parameters for SIP door phone management with 8082 My IC Phone can be modified from
OMC:
As of OXO Connect R2.1:
Subscribers Misc > Generic Parameters for SIP Phones > Door Phone Parameters
As of OXO Connect R3.0:
System Miscellaneous > Generic Parameters for IP Phones > Door Phone Parameters
OMC Parameter
Door Phone Name
Door Open Signal
Door Phone Name: defines the name that must be given for all SIP door phone terminals. Default
value for this parameter is 'Doorcam'.
The unique name defined with 'Door Phone Name' parameter is used by 8082 My IC Phone to identify
calls from SIP door phones.
Note:
The 'Door Phone Name' parameter is case sensitive. SIP door phone names must be unique and not the same as
the 'Door Phone Name' parameter.
Door Open Signal: defines the DTMF code that is sent from 8082 My IC Phone to SIP door phone to
open the door latch. The default value for this parameter is 55.
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
Device commissioning
Common/Specific
to 8082 My IC
phones
Common
Common
Common
Common/Specific to
8082 My IC phones
Common
Common
Default Value
Possible Values
1000 kbps
[0 .. 65535]
2500 kbps
[0 .. 65535]
PM0
PM0 / PM1 / NS
Video call parameters
Default Value
Possible Values
Doorcam
STRING
55
STRING
on page 119 to
121/216

Advertisement

loading