Advertisement
Chapter
8
Device commissioning
8.1 SIP Terminals
8.1.1 8001/8001G Deskphone
8.1.1.1 8001/8001G Deskphone Commissioning
8.1.1.1.1 Overview
The 8001/8001G Deskphone sets are plug&phone, which means they are automatically created in the
OXO Connect, when connected to the network. A default certificate in the system allows plug&phone.
8.1.1.1.2 Prerequisites
The 8001/8001G Deskphone software must be in version 3.6.0.5. If a previous software version is
installed on the set, the set starts as an "Open SIP Phone" and is not recognized as 8001/8001G
Deskphone SIP Phone".
The software is downloaded according to the initial 8001/8001G Deskphone software version of the
set:
1. Sets having a software version prior to 3.5.0.8 must be upgraded to the intermediate version 3.5.0.8
2. Sets are upgraded to version R120-v3.6.0.5
•
The OXO Connect must be operational
•
A free IP address must be available for the set
•
A port with PoE must be available on a switch
•
If the set is configured to start in dynamic mode (default configuration, a DHCP server must be
configured:
•
If using the OXO Connect DHCP server: a range of available IP addresses must be configured
(in OMC, go to ALU IP Phones: DHCP IP Range).
•
If using another DHCP server: the URL for the configuration files must be provided. This URL is
indicated using two proprietary options of DHCP server:
•
Option 66 must specify the DM IP address, the value of this option must contain <OXO
Connect_IP_address:10443>
•
Sub option 67 of option 43 (DHCP Vendor Specific information) must contain a string value
set to « /dmcfg/ »
The URL to download the configuration files is https://<OXO Connect_IP_address>:10443/
dmcfg.
The CGI script included in the URL is executed on the OXO Connect to create the device (if
necessary) and generate the configuration file.
8.1.1.1.3 Connecting the set to the LAN
Once the IP configuration is done, the set can be connected to the LAN:
1. Turn the set over so that you can see its base.
2. Plug the RJ45 cable into the set's LAN connector.
3. Connect the RJ45 cable to the LAN.
The set starts and connects to the system
8AL91217USAA - Ed. 01 - July 2018 - Installation Manual
109/216
Advertisement
