ACC RC-96 Owner's Manual page 78

Chapter Five: How to Be a Control Operator
Low Courtesy Tone
Select
Initialize Command
65 ZD Zero Hang Time Disablet . Disables zero hang time.
66 ZE Zero Hang Time Enablet Enables zero hang time.
The courtesy tone generated when the Courtesy Tone Select
logic input is in the low state can be Control Op ·selected. (The
logic input is internally pulled low so that if nothing is con­
nected, it is in the low state.) This makes it possible for the .'
Courtesy Tone to indicate which Macro Set is selected while
allowing a hardware override to the CT input high tone.
70 CT Courtesy Tone Low Selectt Selects no tone.
71 CT Courtesy Tone Low Selectt Selects "Bumblebee".
72 CT Courtesy Tone Low Selectt Selects "Yellow Jacket".
73 CT Courtesy Tone Low Selectt Selects "Shooting Star".
74 CT Courtesy Tone Low Selectt Selects "Comet".
75 CT Courtesy Tone Low Selectt Selects "Stardust".
76 CT Courtesy Tone Low Selectt Selects "Duncecap".
77 CT Courtesy Tone Low Selectt Selects "Piano Chord".
78 CT Courtesy Tone Low Selectt Selects "Boop".
79 CT Courtesy Tone Low Selectt Selects "Beep".
The Initialize command causes the computer to perform a "soft
restart" and is equivalent to pressing the reset button. The
command initializes the state of the board and loads Control Op
Macro Set #1. The controller responds to a Reset with the
message, "RC-96 Repeater Controller, Version x."
18 - Reset
Initializes microprocessor.
50 • RC-96 REPEATER CONTROLLER OWNER'S MANUAL