ACC RC-96 Owner's Manual page 184

Glossary
open collector
pad test
paging
patch
Pending 10
prefix
program
Programming commands
PIT
aso
RAM
readback
regeJ~~ated
Touch-Tone
remote base
remote programming
repeater owner
reset
Logic output consisting of solid state contact closure to ground
without capability of sourcing current.
User command procedure which permits users to test their
Touch-Tone pads for proper operation.
Selective calling technique involving tone signalling.
General term for phone patch, covering Autopatch, User Load­
able Autodialer,Emergency Autodialer, and reverse patch .
. ID message attempted when no repeater activity is in progress or
when the repeater carrier is allowed to drop.
Portion of a Touch-Tone command which precedes the root
portion.
Computer instructions stored in memory. Also the act ofre ­
motely configuring the controller.
Touch-Tone commands which enable the repeater owner to re ­
motely program repeater characteristics.
Push-to-talk. Logic output from the controller which tells the
transmitter to transmit.
Exchange of transmissions between users.
Random-access-memory. Semiconductor memory used for
temporary storage by the controller.
Synthesized speech or Morse code acknowledgement by the
controller.
Touch-Tone audio synthesized by the controller into the phone
line for improved patch dialing reliability.
Remotely controlled Amateur radio station. Generally tied to
repeater to allow shared access.
The ability to remotely change various characteristics of the
controller.
A person with access to Programming commands.
Act of computer starting execution of its program from the
beginning. Results from pushing Reset button, entering the
Reset Control Operator command, or protective circuitry.
154 • RC-96 REPEATER CONTROLLER OWNER'S MANUAL