ACC RC-96 Owner's Manual page 183

external device busy
firmware
five/six tone sequential
Forced
CW 10 , :
frequency synthesizer
group call
hang time
high true
InitiallD
interdigit timer
Kerchunker filtering
link
lock
low true
message editor
offhook
onhook
Glossary
Electrically-erasable programmable read-only-memory. In­
system reprogrammable non':'volatile memory.
Logic input from DVR or external tape playback system.
Computer program stored in EPROM.
Paging tone signalling fonnat consisting of five or six. tones.
,ID message attempted when controller cannot generate a synthe ­
sized speech ID because a user is talking.
Device in remote base transceiver which determines transmit and
receive frequency ·of transceiver.
Paging tonesignalling:fonnat consisting of:eight second continu ­
ous tone, for alerting a group ofpagers with common "B" tone.
.
Period that repeater transmitter stays on after input signal goes
away.
Logic output where high state indicates active function.
ID message attempted when a new repeater user appears after a
period of inactivity.
Timer which disqualifies a command sequence if too long a
period between individual digits occurs.
Algorithm which discourages brief unidentified transmissions.
Hard wired or rf connection to another repeater or to transceiver.
User Loadable Autodialer state which prohibits entry or erasing
of phone numbers. Also state ofcontroller where Programming
commands may not be entered.
Logic output where low state indicates active function.
Portion of controller Programming command set which allows
repeater owner to construct Morse code and synthesized speech
messages from the available character set and vocabulary.
State of telephone circuit where call is in progress.
State of telephone circuit where call is not presently in progress.
RC-96 REPEATER CONTROLLER OWNER'S MANUAL· 153