ACC RC-96 Owner's Manual page 30

Chapter One: Introduction and Specifications
ber, while you're trying to drive down the freeway. The RC-96
controller's built-in autodialer lets you dial stored numbers with
simple two digit commands. Just tell it what autodiallocation
you want, then the controller goes offhook, waits for dial tone,
and dials the number for you in Touch-Tone or dial pulse. If the
number you want isn't in one of the autodialer's
200
slots, enter
the number as part of the patch command and it will be read back
to you (in voice) to make sure you've entered it correctly before
it dials!
The controller's support of synthesized remote base operation
allows linking your repeater to other repeaters accessible from
your site, extending the range of your system and making your
radio equipment more valuable. CTCSS access and control and a
Touch-Tone access mode provide security and protection from
interference. Two-tone, five-tone, and DTMF paging offer selec­
tive calling through your repeater to standard pocket pagers,
which means users don't have to be listening to be available.
Remote programming is the key to the flexibility and power of
the RC-96 controller. Its Touch-Tone command set allows
remote reprogramming of messages, autodial numbers, command
codes, and more. The remotely programmed information is
stored in a reliable E2PROM, which combines the data integrity
of a PROM with the flexibility of in-system reprogramming. No
information is lost when power fails. And it isn't necessary to
reprogram your controller when you upgrade the software.
The RC-96 controller is fully compatible with ACC's Digital,
Voice Recorder. The DVR lets you remotely record the various
programmable messages in your '96. It also provides voice
mailbox capability for your users, from over the air and over the
phone. The '96 and DVR make an unbeatable pair!
This is just a sampling of the capability of the RC-96 Repeater
Controller - read on to find out the whole story.
2 • RC-96 REPEATER CONTROLLER OWNER'S MANUAL